MULTICOLOR SPECIALTIES, INC. 800/536-5456 Order: 800/362-6617

MULTISPEC ROLLER APPLICATION DIRECTLY
OVER INTERIOR HARD TEXTURED SURFACES
(Cinder Block, Cement Block, Sand Textured Latex, Knockdown, Plaster, Brick, Masonry, Stucco, and Adobe)

Step 1 / Required – Apply Multispec
Clean surface thoroughly. Using Speckle Effects special open cell, reticulated foam roller
cover, roll Multispec directly over surface.

Step 2 / Optional – Apply Clear Topcoat
Using a short nap roller cover or brush, apply 2-3 coats of high performance, clear
protective topcoat such as Plioshield^TM or Multispec MCT over Multispec. First coat acts as
a sealer, while subsequent coats add protection and impart more gloss.

Note

• If surface is previously coated, it may be necessary to first apply Multispec textured, adhesion promoting basecoat (SE1 White – tinted to match predominant fleck color in Multispec WaterColors; or SE2 Gray for Multispec Stone Accents).
• Allow individual coats to dry thoroughly before recoating.
• Follow manufacturer’s label instructions and application guidelines for coatings, equipment and tools.