MULTICOLOR SPECIALTIES, INC. 800/536-5456 Order: 800/362-6617

MULTISPEC SPONGE APPLICATION

Great for Smaller Objects, Decorative Accessories, Lawn and Garden Ornamentation, and Architectural Elements

Step 1 / Required – or Optional - Depending on Surface to be Covered - Prep and Prime
Clean surface thoroughly. Using a short nap roller or brush, apply one coat of Multispec textured,adhesion promoting basecoat (SE1 White for Multispec WaterColors or SE2 Gray for Stone Accents). Textured absorbent surfaces may not require basecoat.

Step 1 / Required – Apply Multispec
Using a clean new sponge, dampen slightly with water before dipping into Multispec. Dab on the Multispec with the sponge.

Step 2 / Optional – Apply Clear Topcoat
Depending on expected use of item being painted, apply 1 to 3 coats of high performance, clear protective topcoat such as Plioshield^TM or Multispec MCT. For exterior applications, like lawn and garden ornaments, use Plioshield high performance exterior grade clear protective topcoat.

Note

• Allow individual coats to dry thoroughly before recoating.
• When using Multispec WaterColors which do not contain white flecks, SE1 White Basecoat should be tinted to match predominant fleck color in WaterColors.
• Follow manufacturer’s label instructions and application guidelines for coatings, equipment and tools.
• For a smooth finish, spray apply Multispec. Refer to spray application guidelines.