MULTICOLOR SPECIALTIES, INC. 800/536-5456 Order: 800/362-6617

MULTISPEC SPRAY APPLICATION
FOR SMOOTH INTERIOR WALLS

Step 1 / Required – Prep and Prime
Clean surface thoroughly. Using a roller, brush or appropriate spray equipment, prime with a top quality latex primer/sealer.

Step 2 / Required – Apply Multispec
Using suitable HVLP spray equipment, spray apply Multispec in one step, cross hatching surface to achieve full-coat coverage and a smooth, even application. See detailed Multispec Spray Equipment Guidelines.

Step 3 / Optional – Apply Clear Topcoat
Apply 2 to 3 coats of high performance, clear protective topcoat such as Plioshield^TM or Multispec MCT. First coat will seal Multispec to facilitate subsequent cleaning. Second and third coats will enhance durability and/or impart more gloss. MCT is available in a low sheen finish, well-suited for interior walls.

Note

• For best results when applying Multispec over new unpainted drywall, first apply a solvent base primer/sealer/stain killer (e.g. Zinsser H20 Oil Base Primer Sealer). New drywall is often manufactured from recycled materials containing ink, which can bleed out and stain or discolor Multispec.
• Allow individual coats to dry thoroughly before recoating.
• Follow manufacturer’s detailed label instructions and application guidelines for coatings, equipment and tools.
• For a textured finish; roller apply Multispec. Refer to roller application guidelines.